Installation Procedure *In Above Video.
You are looking at a 2008-2014 Subaru WRX or STI "HATCHBACK" Pre-Cut tail light overlay kit.
- 2008 WRX STI Impreza Hatchback
- 2009 WRX STI Impreza Hatchback
- 2010 WRX STI Impreza Hatchback
- 2011 WRX STI Impreza Hatchback
- 2012 WRX STI Hatchback
- 2013 WRX STI Hatchback
- 2014 WRX STI Hatchback
Included in this Kit:
1x Driver Side Outer, 1x Driver Side Inner, 1x Passenger Side Outer, 1x Passenger Side Inner and 2x 3rd Brake Light Overlays.
This Product is Made With:
Oracal 8300 Transparent Cal (Gloss Transparent Red)
DIY Application Caution:
Dry Application Preferred
Wet Application OK.
Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at lease three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the user, prior to the application of the material.